Selasa, 15 Januari 2013

mengatasi map drive yang selalu disconnect setiap logon pada win 7

permasalahan ini bikin pusing kepala
untung ketemu solusi mujarabnya
ternyata pada windows7 saat logon, windows7 tidak menyimpan data koneksi, sehingga harus melakukan reconnect ulang pada network.
tidak seperti windows xp yang otomatis connect.

solusinya:
buat windows 7 tidak reconnect ulang dengan cara
ketik "net config server /autodisconnect:-1"

lihat hasilnya..
:)

ini versi inggrisnya :

To All,
Here is what I have found.  This is a problem with Windows 7 and nothing else.  After several test and looking at forum after forum.  here is what I came up with.
I have 3 machines.  1 (XP) and 2(Windows 7 recently loaded).  the 2 machines that I loaded Windows 7 (fresh) were both XP.  The 1 XP machine that is still XP for this post I will call File_Machine (because this is where I hold my files and map to from the other machines.
1. When my other 2 machines were loaded with XP I have no problem with mapped drives.  No dropping or reconnection problems.
2. I load Windows 7 on 1 of my machines and start noticing when I would shutdown or logoff it woudl hang at the log off screen and the only way to shutdown is a hard shutdown.  I knew it was related to a network connections not closing or something but could not isolate it.
3. Installed Windows 7 one the other machine (oohh by the way 1 is Windows 7 Ultimate and the other is Professional).  I started experiencing the same problems with this machine mapping back the my File_Machine.
4. Saw a post referencing the idle network connection disconnect feature in the Windows Operating system.. so I looked at my XP machine (File_machine) active sessions.
5. I brought both windows 7 machine online and let them restore the network connections to the XP box.  after being idle for a while the sessions dropped because they were idle (this is normal and by default).  ok fine.. no problems there.
6. here is the kicker.. when I went back to either Windows 7 machine and clicked on the mapped drive, it hung and would not reconnect to the share.  the share is fine and active.  The problem is the Windows 7 is not sending the correct signal to the system housing the share to reconnect.
7. To confirm this I ran the following command on the XP (File_machine).. NET CONFIG SERVER /AUTODISCONNECT:-1  (this command disabled the autodisconnect feature in a network connection is idle).. the (-1) represents the duration to wait before disconnecting.  -1 is to disable.. I believe the number range is from 0 to 655555 or something.. representing seconds.
8. after the was disabled there were no more dropped connections.
9. set the number to 1 and tested again.. and the problem came back..
What does this say.. Microsoft needs to look at Windows 7 reconnection attempt commands for idle connection and see what signal is being sent to the resource to say wake up and reconnect me because it's not working..
Hopes this helps everyone and Hope MS reads this and looks into it.. You know have the info on how to recreate the problem.

Minggu, 11 September 2011

hari minggu ini keadaan udah agak lumayan damai.
maklum, si dia udah rada tenang dan gak marah2 lagi..
berarti rayuankku masih maut..
hiihihihihi....